YOUR CHOICE FOR FURNACE AND AC REPAIR IN JOHNSON COUNTY KANSAS
Gardner
Your best choice for AC, Heat Pump, & Furnace Repair in Gardner, KS
In the Johnson County Kansas, Ideal Air Heating and Cooling is well known for providing exceptional repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with Ideal Air Heating and Cooling because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for AC, Heat Pump, & Furnace Repair in Gardner, KS in Olathe KS. Call us today at 913.422.7373!
Local Reviews
for Gardner, KS
Powered by Nearby NowAwesome service!
Jonathan - Gardner, KS
Always Great Service
Jessica - Gardner, KS
We've used Ideal Air in Olathe for our AC go-to for about 5 years. They're always very friendly, courteous, professional, and knowledgeable. Chris has serviced our AC at both our last house and our current house, and always does a top-notch job.
Good initial experience!
Patti - Gardner, KS
Great service
Joyce - Gardner, KS
Great customer service. Friendly & knowledgeable staff!!!
Chad - Gardner, KS
Great support & lots of patience to satisfy customers questions/concerns. The attention to detail is amazing as well.
Jacob W.
Perform AC tune up on 2013 Lennox. PM check on electrical, freon pressures, filter, air flow and performance of system. Check dampers. Clean AC.
Jacob W.
Performed furnace tune up on 2016 Carrier system. PM check on electrical and ignition systems, safety controls, flame sensor, service and test of humidifier. Also checked Air Bear filter and dampers. Cleaned system.
Jacob W.
Perform AC tune up on 2003 Trane. PM check on electrical, freon pressures, filter, air flow and performance of system. Check dampers and turn off humidifier. Clean AC.
Jacob W.
Added refrigerant to a 2007 Goodman AC system to optimal performance pressures, checked electrical and air flow, and cleaned AC to return system to proper operation.
Jacob W.
Performed AC tune up on 2016 York. PM check on electrical, refrigerant pressures, filter, air flow and performance of system. Checked dampers and turned off humidifier. Cleaned AC.
Jacob W.
Performed AC tune up on Trane system . PM check on electrical, refrigerant pressures, filter, air flow and performance of system. Checked dampers.
Chris T.
Installed a new Amana System
Chris T.
Installed a new Amana system.
Chris T.
Installed a new UV system and a micro guard filters.
Jacob W.
Performed furnace tune up on 2003 Trane. PM check on electrical and ignition systems, safety controls, flame sensor, service and test of humidifier. Also checked 20x25x1 filter and dampers. Cleaned system.
Jacob W.
Performed furnace tune up on 2011 York. PM check on electrical and ignition systems, safety controls, flame sensor, service and test of humidifier. Also checked Air Bear filter and dampers. Cleaned system.
Jacob W.
Performed furnace tune up on 2013 Lennox. PM check on electrical and ignition systems, safety controls, flame sensor. Also checked 16x25x1 filter and dampers. Cleaned system.
Jacob W.
Performed furnace tune up on 2014 York. PM check on electrical and ignition systems, safety controls, flame sensor, service and test of humidifier. Also checked Air Bear filter and dampers.
Jacob W.
Performed furnace tune up on 2008 Trane and 2000 Trane AC. PM check on electrical and ignition systems, safety controls, flame sensor. Also checked 20x25x1 filter and dampers. Replaced capacitor tor indoor blower. Also checked Refrigerant charge on AC and electrical connections.
Jose P.
Checked furnace operation. Checked furnace blower and all electrical. Removed, cleaned, and tested ignition system. Checked all safety components. Check gas iinputs and temperatures. Test sequence of operation.
Jacob W.
Performed furnace tune up on 2011 Lennox. PM check on electrical systems, safety controls, flame sensor, ignition system and a Filter check.
Chris T.
Worked on a Rheem air conditioner. Checked refrigerant pressures and electrical components
Sterling K.
Performed tune up on 2005 Ducane Furnace. Tested all safety controls. Checked electrical wiring and connections. Checked blower motor and wheel. Tested ignition system. Checked filter and tested humidifier. Also installed NEST Thermostat and tested operation.
Jose P.
Perform complete A/C tune up. Clean outdoor unit. Check all electrical both at air conditioner and at the furnace. Check motors. Check refrigerant charge for proper pressures and temperatures.
Sterling K.
Performed tune up on 2015 York AC. Checked electrical wiring and connections. Checked and replaced filter. Tested motors and capacitors. Tested refrigerant temperatures and pressures.
Sterling K.
Performed repair on 2010 Heil AC. Removed and replaced failed dual run capacitor. Tested refrigerant temperatures and pressures.
Sterling K.
Performed tune up on 2011 York Air Conditioner. Checked electrical wiring and connections. Tested R410a refrigerant temperatures and pressures. Washed outside unit.
Sterling K.
Performed tune up on 2014 York Air Conditioner. Checked electrical wiring and connections. Checked R410a refrigerant temperatures and pressures. Checked filter. Turned off Humidifier. Tested motors and airflow. Tested equipment operation.
Sterling K.
Furnace was tripped on an airflow fault. Cause of problem was a closed damper in the supply duct creating a restriction. Adjusted damper to allow correct amount of air.
Sterling K.
Removed old equipment. Installed new 96% 2-Stage Amana Futnace and 18 SEER 2-Stage Air Conditioner. Installed GeneralAire 900 whole house Humidifier. Installed digital programmable Thermostat and Air Bear 20x25x5 filter.
Call 913.422.7373 or, Fill Out Form
Olathe, KS 66062
Hours: Mon - Fri: 7:30AM - 4:30PM
Phone: 913.422.7373